在广东酒店晚上怎么叫服务

  • Changchun Jinsai pharmaceutical cold storage installation project (phase I)

    Overview of cold storage: 1. Two pharmaceutical cold stores are proposed, with temperature of 2 ~ 8 ℃ and - 20 ℃ respectively, with pentahedron and adjustable temperature; 2. The acceptance standard of GSP / GMP can be met at the same time; 3. Centralized control is required in management; 4. Efficient and energy-saving scheme and equipment are selected under the premise of cost control; 5. Main requirements of urs documents are met. Cold storage scheme: 1. The size of the 2 ~ 8 ℃ medical cold storage is: length 15.3 m * width 2.6 m * height 3.3 m, the total area is 40 square meters / volume is 120 cubic meters; the size of - 20 ℃ cold storage is: 7.85 meters long * 2.6 meters wide * 3.3 meters high, the total area is 21 square meters / volume is 63 cubic meters. 2. 2 ~ 8 ℃ pharmaceutical cold storage refrigeration system

    July 30, 2020
  • Hangzhou Yuanda biological 1300 m3 medical cold storage project

    Project introduction: the project is located in Hangzhou Jianggan science and technology economic park. The cold storage is divided into three cold storage rooms, one of which is 210 cubic meters for finished products, the second is 225 cubic meters for finished products, and the third is 600 cubic meters for semi-finished products, with a total construction area of 7000 cubic meters and a temperature of 2-8 ℃. Configuration introduction: the refrigeration system of the pharmaceutical cold storage adopts Emerson Valley scroll refrigeration compressor unit of the United States, which has large refrigeration capacity, high cost performance, safety and reliability. Haoshuang customized series air coolers are used in the warehouse. The fan runs stably, the noise is small, and the air supply distance is far, which makes the cooling speed in the warehouse fast, greatly enhances the defrosting effect, increases the rapid convection circulation, so as to achieve the temperature uniformity in each corner. In the aspect of storage board, three refrigerated warehouses adopt 100m

    July 29, 2020
  • Installation project of small medical cold storage in Sichuan baoshihua hospital

    Overview of cold storage: 1. 10 square meters of low-temperature medical warehouse will be built with the temperature of 2-8 ℃, and the temperature can be adjusted; 2. It can meet the acceptance standard of GSP / GMP; 3. It needs to meet the centralized control in management; 4. Under the premise of cost control, select efficient and energy-saving schemes and equipment; 5. Meet the main requirements of urs documents. Cold storage scheme: 1. The size of the medical storehouse is 3.5m * 3M * 2.5m, with a total area of 10.5m2/volume of 26.25m3; 2. The refrigeration system uses two sets of 2HP Emerson scroll compressor units with a refrigerating capacity of 4010w and a power of 1580W. The unit has large refrigeration capacity, high cost performance, safety and reliability. Cold storage equipped with the same is one for use and one for standby

    July 24, 2020
  • Shenyang Sansheng pharmaceutical 3000 square meter pharmaceutical cold storage installation project

    Project introduction: the project is located in Shenyang Economic and Technological Development Zone, with a total area of 3000 square meters. The project is divided into several cold storage rooms, namely, 2-8 ℃ cold storage, - 25 ℃ freezer, 15-20 ℃ constant temperature storage and 15-20 ℃ cool storage, with the temperature of 35% - 75%. Configuration introduction: the refrigeration system of the pharmaceutical cold storage adopts the semi closed piston parallel unit of German bizel brand, which has large refrigeration capacity, high cost performance, safety and reliability. Haoshuang customized air cooler is used in the warehouse, which has stable operation, low noise and long air supply distance, so that the cooling speed in the warehouse is fast, the defrosting effect is greatly enhanced, and the rapid convection circulation is increased, so as to achieve the temperature uniformity in each corner. In the aspect of storage plate, the refrigerated warehouse adopts 120mm thick polyurethane double-sided color steel

    July 3, 2020
  • 2100m3 pharmaceutical cold storage project of Fujian Luyan Pharmaceutical Co., Ltd

    Project introduction: the project is located in Fuzhou City, Fujian Province. The whole project is divided into three parts: dismantling, transferring and building. The new project is divided into two phases. The first phase has a total building area of 2100 cubic meters, and the second phase is located in Xiamen with a total construction area of 3500 cubic meters. In the first phase, the temperature of 400 m3 buffer zone is required to be 0-8 ℃ and the humidity is 35% - 70%. 2100 cubic meters of pharmaceutical cold storage construction is divided into six rooms, temperature requirements - 5 ~ 8 ℃, humidity 30% ~ 65%. Configuration introduction: the pharmaceutical cold storage refrigeration system adopts 13 Emerson Valley wheel condensing refrigeration units, which have large refrigeration capacity, high cost performance, safety and reliability. 17 sets of Haoshuang customized air coolers are used in the warehouse. The fan runs stably, the noise is small, and the air supply distance is far, which makes the cooling speed in the warehouse fast and greatly enhanced

    June 5, 2020
  • Project of 15000 cubic meters medicine cool Storehouse Project of Jiangsu Taizhou Yangtze River Pharmaceutical Group

    Project introduction: the drug shady storehouse is located in Taizhou, Jiangsu Province, with a total construction volume of 15000 cubic meters. The drug shady storehouse is divided into two rooms. The first one covers an area of 876 square meters, the temperature is 15 ~ 19 ℃, the humidity is less than 65%; the second one covers an area of 1180 square meters, the temperature is 20 ~ 25 ℃, the humidity is ≤ 65%, and the warehouse height is 6.9 meters. Configuration introduction: the refrigeration system of the project adopts Emerson Valley scroll compressor unit of the United States, which has large refrigeration capacity, high cost performance, safety and reliability. In addition, Zhejiang Gaoxiang series high-efficiency strong wind chiller equipped with the cold storage fan has stable operation, low noise and long air supply distance, which makes the cooling speed in the warehouse fast and the convection circulation fast, so as to achieve the temperature uniformity in each corner. Library Board aspect uses

    January 16, 2020
  • 60 cubic meter cold storage project of Zhejiang Ningbo CDC

    Project introduction: the center for Disease Control and prevention medicine cold storage address is located in Ninghai County, Ningbo, the temperature of cold storage is 2-8 ℃. The refrigeration system of cold storage adopts Valley wheel air-cooled compressor unit, which has large refrigeration capacity, high efficiency, environmental protection, safety and reliability. Meanwhile, it is equipped with 100 mm polyurethane double-sided color steel plate, which is energy-saving and environmental protection, and has excellent heat resistance rate, so as to ensure the realization of stable low-temperature environment of medical cold storage and greatly reduce the later operation cost. In addition, the special control box, temperature and humidity recorder, sound and light alarm lights are equipped to realize the automation and standardization of medical cold storage management. At present, the medical cold storage of CDC has been installed and debugged. It has been verified by the third party that it meets the national certification standards, and has been put into formal use. Customer profile: Ningbo Ninghai County Center for Disease Control and prevention is located in

    August 26, 2019
  • Shaanxi Huikang biotechnology 800 cubic meter pharmaceutical cold storage project

    Project introduction: the total volume of Shaanxi Huikang biotechnology medicine cold storage is 800 cubic meters, which is divided into 6 rooms, including 1 Preparation warehouse and 5 raw material warehouse. Project configuration: Emerson Valley wheel box type air cooling unit is selected for unit configuration, and ceiling type air cooler is equipped, so as to realize high-efficiency refrigeration, environmental protection and energy saving, and improve the utilization rate of cold storage capacity. In addition, in the selection of thermal insulation board, according to the requirements of different warehouse temperature, the polyurethane double-sided color steel plate with thickness of 120mm is selected according to the requirements of different warehouse temperature, so as to better ensure the stability of low temperature in the warehouse and avoid the safety impact of warehouse temperature fluctuation on the stored pharmaceutical products. At present, the construction of Shaanxi Huikang pharmaceutical cold storage has been officially completed, and it has been verified by the third party of national cold storage. Customers

    August 7, 2019
  • Wuhan Mayinglong Pharmaceutical Co., Ltd. 1100 square meters medicine cool storage project

    Project Name: Wuhan Mayinglong 1100 square meter medicine cool store project size: there are 4 cold storage rooms in the project, which are: two identical storehouses: 25m * 6m; shady storehouse: 60m * 6m; shady warehouse size: 100M * 6m; warehouse height: 5.9m; temperature: 16 ~ 20 ℃, temperature adjustable; Configuration Description: 1 Four sets of Emerson grain wheel compressor units are used in the refrigeration system of the cool medicine storehouse, which has large refrigerating capacity, high cost performance, safety and reliability. At the same time, it is equipped with high-efficiency convection cooling fan in each corner of Meile cold storage, so that the temperature of each corner of Meile refrigerator can reach even temperature. Results: according to the customer's high standards and requirements, the whole library equipment is

    August 6, 2019
  • Zhejiang Bosheng biological 800 cubic meter medical equipment cold storage project case

    Project introduction: Bosheng biomedical equipment cold storage has a total volume of 800 cubic meters, which is divided into three rooms: buffer room, cold storage (2-8 ℃) and freezer (- 25 ℃). In terms of unit configuration, Emerson Valley wheel box type air cooling unit and ceiling type air cooler are selected, so as to realize high-efficiency refrigeration, environmental protection and energy conservation, and improve the utilization rate of cold storage capacity. In addition, in the selection of thermal insulation board, polyurethane double-sided color steel plate with different thickness was selected according to the requirements of different warehouse temperature. For example, the warehouse with - 25 ℃ storage temperature requirement is equipped with polyurethane double-sided color steel plate with thickness of 150 mm, so as to better ensure the stability of low temperature in the warehouse, and avoid the effect of storage temperature fluctuation on the efficacy and safety of stored medical devices and other medical products. At the same time, the ground in the protection of good separation

    July 10, 2019