How much is the construction cost of 500 tons constant temperature storage? First of all, let's analyze how much area should be needed for the construction of 500 ton constant temperature storage? If there are no special requirements for the temperature and equipment of the cold storage, the storage capacity is 500 tons and the constant temperature storage needs about 3000 cubic meters, Then the cost of 500 tons constant temperature storage is about 350000-400000.
This price can only be used as a general reference standard, because in the actual engineering construction, there are many factors affecting the price of cold storage, the following small series will give you a detailed introduction.
1. Size of cold storage
Different sizes of cold storage are directly related to the cost of cold storage. In general, the larger the cold storage area is, the higher the overall cost is. Because the cold storage area is large, the more insulation materials are needed, and the higher the cold storage price is. Another situation is that the smaller the size of the cold storage, the higher the construction unit price per cubic meter, because even for a very small cold storage, the equipment owned by the cold storage also needs to be fully equipped. Therefore, the smaller the cold storage, the construction cost per cubic meter will be higher than that of the large one.
2. Storage board cost
Cold storage insulation board It is also one of the factors affecting the cost of cold storage. According to the grade, the cold storage plate can be divided into three grades: low, medium and high materials, and the corresponding plate thickness is 100 mm, 120 mm and 150 mm. Different grades of plate and thickness will directly affect the insulation effect and service life of the cold storage.
At present, polyurethane and polystyrene are commonly used, polyurethane board is our commonly used, advantages are greater than polystyrene board, but the price is much higher. Polystyrene board, also known as foam board, has the advantages of low price and better thermal insulation performance than polyurethane board. Generally, it is only suitable for cold storage above 0 degree. Therefore, it is recommended to use 100 mm thick polystyrene board for constant temperature storage.
3. Refrigeration equipment
Refrigeration equipment is divided into many kinds, including condenser, evaporator, compressor, electric control system, etc. at the same time, refrigeration equipment is also the most important cost of cold storage construction. The price of general refrigeration equipment mainly reflects the difference between imported and domestic equipment. Because the imported equipment has good quality, the price is high, while the price of domestic equipment is low. However, there is a certain gap between the imported equipment and the imported equipment in terms of heat preservation, energy saving, service life and performance. Therefore, we generally recommend that customers choose large brand refrigeration equipment, brand equipment is guaranteed, and at the same time, the performance will be more stable in the later use.
4. Cold storage room
Generally, the cold storage of 500 tons can be divided into several cold storage rooms. The cold storage room can be divided into: Precooling room Processing workshop, acid discharging room, quick freezing room, storage room, etc. Due to the different uses of cold storage rooms, the cost is also different Pharmaceutical cold storage It also needs to be equipped with a backup system, and at the same time In line with GSP pharmaceutical certification standards If it is chemical raw material cold storage, it needs explosion-proof requirements; if it is a food factory, it may need processing workshop, so we should make reasonable design and planning according to the actual needs of customers.
Cold storage cost consultation